Rendezvous FWD V6-3.5L VIN L (2006)
License Plate Lamp: Service and Repair
LICENSE LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Remove the rear lift gate applique.
2. Remove the license plate lamp from the applique by pulling rearward from the applique.
3. Remove the license plate lamp socket, turning counterclockwise.
4. Remove the license plate lamp bulb from the license plate lamp socket, if necessary.
INSTALLATION PROCEDURE
1. Install the license plate lamp bulb to the license plate lamp socket, if removed.
2. Install the license plate lamp socket to the license lamp, turning clockwise.
3. Install the license plate lamp to the rear lift gate applique, pressing until fully seated.
4. Install the rear lift gate applique.
