Rendezvous FWD V6-3.5L VIN L (2006)
Oil Filter: Service and Repair
Engine Oil and Oil Filter Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Place a drain pan under the oil pan drain plug.
3. Remove the oil pan drain plug. Allow the oil to drain completely.
Notice: Refer to Fastener Notice in Service Precautions.
4. Install the oil pan drain plug.
Tighten the drain plug to 26 Nm (19 ft. lbs.).
5. Place the drain pan under the oil filter.
6. Remove the oil filter. Allow the oil to drain completely.
Installation Procedure
