Rendezvous FWD V6-3.5L VIN L (2006)
Lower the vehicle.
Install the EGR pipe and bolt (3) to the EGR valve.
Tighten
Tighten the bolt to 25 N.m (18 lb ft).
Install the transaxle fill tube nut to the stud.
Tighten
Tighten the nut to 13 N.m (115 lb in).
Reposition the heater hoses (1).
Install PCV fresh air tube (1) to the air cleaner outlet duct and to the back of the engine.
Remove the mechanic wire from the EVAP purge solenoid and install the EVAP purge solenoid and bolt.
Tighten
Tighten the bolt to 10 N.m (89 lb in).
Install the EVAP purge solenoid electrical connector to the EVAP purge solenoid.