Rendezvous FWD V6-3.5L VIN L (2006)
Power Steering Line/Hose: Service and Repair
Power Steering Cooler Pipe/Hose Replacement
Power Steering Cooler Pipe/Hose Replacement (LX9)
Removal Procedure
1. Use a suitable tool to remove the power steering fluid from the reservoir.
2. Raise and support the vehicle.
3. Remove the right front tire and wheel.
4. Remove the engine splash shield.
5. Remove the power steering gear heat shield.
6. Remove the cooler pipe low pressure line nut (1) from the power steering gear.
7. Disconnect the low pressure hose from the cooler pipe (3).
8. Disconnect the wiring harness from the cooler bracket studs.
9. Remove the cooler pipe bracket retaining bolts (2).
10. Remove the cooler pipe (4) from the vehicle.
Installation Procedure