Rendezvous FWD V6-3.5L VIN L (2006)
6. Remove the lower control arm to crossmember mounting bolts (1, 5).
Important: Identify the orientation of the voids in the bushing to the crossmember.
7. Remove the bushing from the crossmember.
8. In order to remove the bushing from the crossmember, use the following tools from the J 21474-01 :
^
J-6627-4 (1)
^
J-45411 (2)
^
J-21474-8 (3)
^
J-21474-4 (4)
Installation Procedure
Important: Install the new bushing to the crossmember in the same mannerism as/was the old bushing noting the voids.
1. Use the J 21474-01 in order to install the bushing to the crossmember.