Rendezvous FWD V6-3.5L VIN L (2006)
4. Install the air dryer.
5. Install the air tubes (1) onto the inflator solenoid.
6. Install the compressor wires into the electrical connector.
7. Install the air compressor filter to the underbody rail.
8. Install the air compressor bracket nuts.
^
Tighten the air compressor bracket nuts to 10 Nm (89 inch lbs.).
9. Install the air compressor bracket bolts.
^
Tighten the air compressor bracket bolts to 10 Nm (89 inch lbs.).
10. Connect the air compressor electrical connector.
11. Install the air compressor and bracket to the underbody rail.
12. Lower the vehicle.
