Rendezvous FWD V6-3.5L VIN L (2006)
Transmission Temperature Sensor/Switch: Service and Repair
Fluid Temperature Sensor Replacement
Fluid Temperature Sensor Replacement
Removal Procedure
1. Remove the case side cover.
2. Use a small flat-bladed tool in order to remove the wiring harness from the solenoid valve(s) (315A, 315B, 322, 334 and/or 440), TFP manual
valve position switch (395) and/or the temperature sensor (391).
3. Remove the wiring harness (224).
Installation Procedure
1. Connect the wiring harness (224).