Rendezvous FWD V6-3.5L VIN L (2006)
Windshield Washer Pump: Service and Repair
Washer Pump Replacement
WASHER PUMP REPLACEMENT
REMOVAL PROCEDURE
1. Open the hood.
2. Drain the washer solvent from the washer solvent container.
3. Disconnect the front washer pump electrical connector.
4. Disconnect the front washer hose from the front washer pump.
5. Using a small flat-bladed tool, remove the front washer pump from the washer solvent container.
INSTALLATION PROCEDURE
1. Position the front washer pump to the washer solvent container pressing in until fully seated.
2. Connect the front washer hose to the front washer pump.
3. Connect the front washer pump electrical connector.
4. Fill the washer solvent container with washer solvent.
5. Close the hood.