Rendezvous FWD V6-3.5L VIN L (2006)
Wiper Motor: Service and Repair
Wiper Motor Cover Replacement
WIPER MOTOR COVER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the wiper system drive module.
2. Remove the wiper motor cover screws.
3. Remove the wiper motor cover from the wiper motor.
INSTALLATION PROCEDURE
1. Position the wiper motor cover to the wiper motor.
2. Install the wiper motor cover screws.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the screws to 3 N.m (27 lb in).
3. Install the wiper system drive module.