Riviera V6-231 3.8L Turbo VIN 8 4-bbl (1983)
FIGURE 4
8.
Inspect case to case cover mating surface and replace case if distorted or damaged (refer to Figure 4).
FIGURE 5
9.
Replace case cover using the following procedures to install the sprocket supports to minimize case cover distortion (refer to Figure 5):
FIGURE 6
^
Using a two-ton arbor press, support the case cover at the sprocket support hole using an appropriate tool such as a plastic pipe (refer to
Figure 6).
^
Install sprocket support gasket and position sprocket support into case cover hole.
^
Use the sprocket support bolts as guides by installing the bolts approximately three to four threads deep.
^
Ensuring sprocket support is aligned and straight in the hole, press the sprocket support into the hole using even pressure until the support is