Riviera V6-231 3.8L VIN C SFI (1989)
Body Control Module: Initial Inspection and Diagnostic Overview
Brake Fluid Is Low
Brake Fluid Switch Circuit
DESCRIPTION:
The BCM provides system voltage to the brake fluid level circuit, and the brake fluid level switch provides the single path to ground. The BCM supplies
and internally monitors the voltage level of the circuit at pin 1C2. When the brake fluid level circuit is open the BCM detects system voltage, but if the
brake fluid level switch provides a path to ground (low brake fluid level in the reservoir), the BCM will detect low voltage. Once the BCM has
determined that all the of the failure conditions have been met, it will send the "BRAKE FLUID LOW" message to the IPC. The BCM will also
illuminate the "BRAKE" indicator on the IPC and will activate the fast paced chime on the chime module.
TEST CONDITIONS:
Ignition is "ON."
FAILURE CONDITIONS:
Brake fluid level is low for at least 5.0 seconds.
ACTION TAKEN:
1.
Display the "BRAKE FLUID LOW" message on the IPC.
2.
Illuminate the "BRAKE" indicator light on the IPC.
3.
Activate the fast paced chime on the chime module.
DIAGNOSIS:
Erroneous message - Short to ground on circuit 33 or shorted switch.
No message - Open in circuit 33, open in switch, or open in ground circuit.
