Riviera V6-231 3.8L VIN C SFI (1989)
Headlamp Switch: Service and Repair
Fig. 6 Instrument Cluster Trim Plate Removal. Riviera (Reatta Similar)
1.
Disconnect battery ground cable, then place tilt wheel in fully lowered position.
2.
Pull center cluster trim panel straight out of dash, then remove screws securing trim panel, Fig. 6.
3.
Grasp both sides of trim panel and pull panel straight out of dash.
4.
Remove screws securing switch module, pull module from instrument panel and disconnect electrical connector.
5.
Reverse procedure to install. Ensure trim panel is properly aligned, then secure to instrument panel.