buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Electrical - No Start Or No Crank With BCM Code 334|Page 34 > < Diagram Information and Instructions|Page 29
Page 1
background image

Alarm Module: Technical Service Bulletins
Electrical - No Start Or No Crank With BCM Code 334

Group Ref.: Chassis/Body Electrical

Bulletin No.: 318113

Date: November, 1993

SUBJECT:
CRANK (OR NO CRANK), NO START AND/OR BCM CODE 334 (REPAIR FUSIBLE LINK SPLICE)

MODELS:
1986-93 BUICK RIVIERAS 
1986-91 CADILLAC ELDORADOS 
1986-91 CADILLAC SEVILLES 
1986-92 OLDSMOBILE TORONADOS

Condition:

Some owners of 1986-1989 Cadillac Eldorados and Sevilles, and 1986-1993 Buick Rivieras and 1986-1992 Oldsmobile Toronados may experience a
condition of a crank but no start and possibly a BCM code 334 set; or some 1990-1991 Eldorados, Sevilles, and 1986-1993 Rivieras or 1986-1992
Toronados may experience a no crank and no start condition and possibly a BCM code 334 set. This condition may be caused by a corroded splice on
circuit 480 at fusible link B (Cadillac) or fusible link J (Riviera and Toronado), located at the ISO power junction block. Refer to Figure 1.

Cause:

Circuit 480 and fusible link B or J is the "HOT AT ALL TIMES" feed to the ECM on all model years. In 1990, circuit 480 and fusible link B or J also
became the "HOT AT ALL TIMES" feed to the PASSKey module. This is the reason for the addition of the no crank condition to the 1990-1993 model
years.

Correction:

To repair this condition repair fusible link splice as outlined in Section 8A-5 of the Service Information Manual.

Electrical - No Start Or No Crank With BCM Code 334|Page 34 > < Diagram Information and Instructions|Page 29