Riviera V6-231 3.8L VIN L SFI (1991)
(Recommended application: 12 volts minimum, 2 amps minimum. A car battery is suggested.)
13.
Connect the SIR inflator module to the pigtail adapter on the universal deployment harness. Refer to Figure 5.
NOTICE:
Ensure that the pigtail adapter connector is fully seated into the inflator module connector. Failure to fully seat the connectors may leave the shorting bar
located in the inflator module connector active and may result in nondeployment of the inflator module.
14.
Verify that the area around the inflator module is clear of all people and loose or flammable objects.
15.
Verify that the inflator module is resting with its soft vinyl trim cover facing up.
16.
Notify all people in the immediate area of your intention to deploy the inflator module as the deployment will be accompanied by a substantial
report which may startle the uninformed.
17.
Separate the two banana plugs on the universal deployment harness that were shorted together in step 3. Refer to Figure 6.
