Roadmaster V8-305 5.0L (1992)
Cowl: Customer Interest
Procedure For Cowl/Hinge Pillar Seam (No Illustration)
1.
Position vehicle on hoist.
2.
Open and raise hood to full open position and disconnect battery.
3.
Disconnect all component attachments to the inner fender liner on the affected side of the vehicle.
4.
Raise vehicle on hoist, and remove wheel and tire on the affected side of the vehicle.
5.
Remove front fender wheelhouse liner to gain access to the front body hinge pillar seams. (The vertical seam of dash to front body hinge pillar and
horizontal seam of dash to floor pan).
6.
Apply Body Seam Sealer to the seams.
7.
Reinstall the wheelhouse liner.
8.
Lower the vehicle and reinstall the components attached to the liner.
9.
Reconnect the battery, lower the hood and remove vehicle from hoist.
