Roadmaster V8-305 5.0L (1992)
Fuse Block: All Technical Service Bulletins
Service Procedure and Identification Label
SERVICE PROCEDURE
1.
Open driver's door and locate fuse block door on end of instrument panel.
2.
Fuse block door may be removed by pulling tab outward.
3.
Carefully peel backing paper from new fuse block label and installing over existing label on fuse block door.
4.
Reinstall fuse block door.
5.
On Roadmaster Estate Wagon vehicles only, install new owner's manual page. Carefully peel backing paper and place new insert sheet onto
owner's manual, page 312.
6.
Install Campaign Identification Label.
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this bulletin will require a "Campaign Identification Label". Each label provides a
space to include the five (5) digit dealer code of the dealer performing the campaign service. This information may be inserted with a typewriter or a
ball-point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner.
Apply "Campaign Identification Label" only on a clean, dry surface.
