Roadmaster V8-305 5.0L (1992)
CAUTION:
When storing a live inflator module or when leaving a live inflator module unattended on a bench or other surface, always face the bag and trim cover up
away from the surface. This is necessary so that a free space is provided to allow the air bag to expand in the unlikely event of accidental deployment.
Failure to follow procedures may result in personal injury.
8.
Place the inflator module on a work bench or other surface away from all loose or flammable objects and with its soft vinyl trim cover facing up,
away from the surface. Refer to Figure 2.
9.
Clear a space on the ground approximately six feet in diameter where the inflator module is to be deployed. A paved outdoor location where there
is no activity is preferred. If an outdoor location is not available, a space on the shop floor where there is no activity and sufficient ventilation is
recommended. Make certain that no loose or flammable objects are within the deployment area.
10.
Place the inflator module with its soft vinyl trim cover facing up on the ground in the space just cleared. Refer to Figure 3.
11.
Stretch the universal deployment harness and pigtail adapter from the inflator module to its full length. Refer to Figure 4.
12.
Place a power source near the shorted end of the deployment harness.
