Roadmaster V8-350 5.7L (1994)
Throttle Position Sensor: Description and Operation
Throttle Position Sensor Circuit.
PURPOSE
By monitoring TPS voltage output, the computer can determine fuel delivery rate based on throttle valve angle or driver demand.
OPERATION
The TPS is a potentiometer with one connection to ground, and the other to the computer 5.0 volt reference source. A third wire from the
computer is used to measure the output voltage from the TPS. As the throttle angle changes (pressing down on accelerator pedal) so does the TPS
voltage output.
LOCATION
The Throttle Position (TP) sensor is connected to the throttle valve shaft.
