Roadmaster V8-350 5.7L VIN P MFI (1995)
B. Coat a new seal (40) with clean mineral base 525 viscosity refrigerant oil GM P/N 12301108 or equivalent and install it.
C. Install the tube assembly (10) to evaporator inlet port.
D. Install nut (39) at evaporator inlet port.
TIGHTEN
^
Nut (39) to 16 Nm (12 lb. ft.).
7. Hose assembly (9) to evaporator outlet port.
A. Remove tape or cap from open end of evaporator outlet port and hose assembly.
B. Coat a new seal (44) with clean mineral base 525 viscosity refrigerant oil GM P/N 12301108 or equivalent and install it.
C. Install hose assembly (9) to evaporator outlet port.
D. Install accumulator hose nut (43) at the evaporator outlet port.
TIGHTEN
^
Accumulator hose nut (43) to 16 Nm (12 lb. ft.).
8. Evacuate and recharge A/C system. See: Service and Repair
9. Leak-test fittings.
