Roadmaster V8-350 5.7L VIN P MFI (1995)
Brake Warning Indicator: Initial Inspection and Diagnostic Overview
Troubleshooting Hints
PERFORM BEFORE BEGINNING SYSTEM DIAGNOSIS:
1. Check I/P Fuse Block Fuse #11. If Fuse #11 is open check for a short to ground in CKT 39.
2. Check brake fluid level. If low, refer to Antilock Brake System. See: Brakes and Traction Control/Antilock Brakes / Traction Control Systems
^
Check for a broken (or partially broken) wire inside of the insulation which could cause system malfunction but prove "GOOD" in a
continuity/voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be
checked by monitoring for a voltage drop with the system operational (under load).
^
Check for proper installation of aftermarket electronic equipment which may affect the integrity of other systems (refer to "General
Troubleshooting Procedures."). See: Diagrams/Diagnostic Aids
^
Refer to System Diagnosis. See: System Diagnosis
