Roadmaster V8-350 5.7L VIN P MFI (1995)
Shift Solenoid: Service and Repair
Fig.16 Electrical Component Locations
REPLACE
1. Raise and support vehicle.
2. Remove oil pan, oil filter and filter seal.
3. Remove accumulator cover bolts.
4. Remove 1-2 accumulator cover, piston and spring.
5. Disconnect control and shift solenoid electrical connectors.
6. Remove pressure control solenoid retainer bolt, then the retainer and solenoid, Fig. 16.
7. Remove shift solenoid retainers and shift solenoids.
8. Remove 3-2 control solenoid retainer and control solenoid.
9. Reverse procedure to install.
