Upper Ball Joint Repair for Roadmaster Estate Wagon V8-305 50L (1991)
Ball Joint: Service and Repair
Upper
1.
Raise vehicle and support with stands at outer ends of lower control arms.
2.
Remove wheel and tire.
Fig. 7 Disconnecting Upper Ball Joint Form Steering Knuckle
3.
Remove cotter pin and retaining nut, then separate ball joint stud from knuckle using a suitable tool, Fig. 7.
4.
Support upper control arm in a raised position.
5.
Remove heads of rivets securing joint to arm, then drive out rivets to remove joint.