buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Wiper Motor > < Wiper Control Module|Front|Page 6967
Page 1
background image

Wiper Gear Box: Service and Repair

1.

Disable airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.

2.

Disconnect battery ground cable.

3.

Remove right and lefthand wiper arm and hose.

4.

Remove lefthand cowl vent screen, then righthand screen.

5.

Disconnect plastic nozzle hose from rubber washer hose.

6.

Remove wiper linkage access hole cover attaching screws, then remove cover.

7.

Disconnect drive link from motor crank arm.

8.

Remove linkage to body attaching screws, then remove linkage through access hole.

9.

Reverse procedure to install.

10.

Rearm airbag system as described under MAINTENANCE PROCEDURES/AIRBAG SYSTEM DISARMING.

Wiper Motor > < Wiper Control Module|Front|Page 6967