Roadmaster Estate Wagon V8-350 5.7L (1993)
Installing Rotor And Bearing Assembly (On-Vehicle)
2. Place the assembly on the neck of the Front Head and seat into place using Rotor & Bearing Installer J 26271-A.
-
Before fully seating the assembly on the Front Head. be sure the clutch coil terminals are in the proper location in relation to the compressor
and that the three protrusions on the rear of the clutch coil align with the locator holes in the Front Head.
Removing Poly-Groove Clutch Coil
Removing Poly-Groove Clutch Coil (Optional Method)
