buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Relays and Modules - HVAC > < A/C High Pressure Cut-Out Switch|Page 5486
Page 3
background image

2.

Locate heater shut off door in heater case (Figure 2).

3.

If heater shut off door appears loose and NOT spring loaded, verify that it is broken by trying to cycle door. Do this by moving temperature lever
from full cool to full warm on manual systems, or toggling temperature selector switch from full cool to full warm on automatic systems.

4.

Pull heater shut off door hinge arm out of its socket at the end closest to the rear of the vehicle.

5.

Remove heater shut off door by reaching through case opening and pushing the broken end of the door into the heater case cavity. Rotate the door
while removing it through case opening.

6.

Install/Connect A/C Module Lower Evaporator Case per Service Manual, Section 1B.

WARRANTY INFORMATION:

Labor Operation: T3300
Labor Time: 0.9 Hr.

Relays and Modules - HVAC > < A/C High Pressure Cut-Out Switch|Page 5486