buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Steering Gear|Service and Repair > < Saginaw Rack & Pinion Manual Steering Gear|Page 4711
Page 2
background image

obtained. On new steering gears (under 400 miles) add 5-11 inch lbs. to previously measured worm bearing preload. Do not exceed total preload
of 18 inch lbs. On used steering gears (400 miles or more) add 4-5 inch lbs. to previously measured worm bearing preload. Do not exceed total
gear preload of 13 inch lbs.

8.

Hold adjuster screw and torque adjuster locknut to 20 ft. lbs.

Steering Gear|Service and Repair > < Saginaw Rack & Pinion Manual Steering Gear|Page 4711