Roadmaster Estate Wagon V8-350 5.7L VIN P SFI (1996)
washers.
6. Remove engine oil filter adapter, then disconnect transmission fluid cooler lines from clip at oil pan.
7. Remove starter, then converter cover bolt/screws and cover.
8. Rotate crankshaft until arrow on crankshaft balancer is pointing straight down (six o'clock).
9. Remove engine mount through-bolts/screws and nuts, then raise engine with jacking fixture.
10. Remove oil pan bolts, screws, studs & nuts, then oil pan, reinforcements and gaskets Fig. 14
11. Reverse procedure to install. Apply a small quantity of sealer part No. 1052914 or equivalent to front cover and engine block junction and rear
seal retainer and engine block junction.
