Roadmaster Estate Wagon V8-350 5.7L VIN P SFI (1996)
4. Twenty-one bolts (35) using 10 mm socket, from valve body assembly, manual detent spring and roller assembly (41).
5. Three wiring clamps (33), fluid level indicator stop (43), one bolt (36) using 10 mm socket, lube pipe (39), lube pipe retainer (37) and clamp (38).
6. Control valve assembly (44) including the accumulator housing assembly (51), valve body gaskets (45 and 48), spacer plate (46) and accumulator
gasket (47).
7. Manual valve (319) from control valve assembly (44) to prevent any damage.
8. Checkballs (54) from case passages.
NOTICE: Do not use a magnet. It could cause checkball(s) to be magnetized causing metal particles to stick to the ball.
9. Pulse Width Modulated (PWM) solenoid screen (75).
INSPECT
^
Screen PWM solenoid (75), replace if necessary.
DISASSEMBLE