Roadmaster Estate Wagon V8-350 5.7L VIN P SFI (1996)
Control Valve Assembly
^
Control valve assembly.
A. Position as shown on a clean surface.
B. Remove blind hole retainer pins with a drill bit.
CAUTION: Some valves are under pressure - cover the bores while removing the retaining pins or personal injury could result.
C. Remove valve trains, shift solenoids (311 and 313), PCS (320), PWM solenoid (323), PCS screen (302) and shift solenoid filter (317).
D. Valves, springs, bushings and pistons must be laid out on a clean surface.
CLEAN
^
All valves, springs, bushings, pistons, control valve body and accumulator housing in clean solvent.
^
Dry using compressed air.
