buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Campaign - Engine Timing Belt Failure|Page 1434 > < All Other Service Bulletins for Timing Belt:|86613|Page 1431
Page 1
background image

Timing Belt: All Technical Service Bulletins
Campaign - Engine Timing Belt Failure

Model Year  1983

Bulletin No. 83-C-9

File In Group 60

Number

51

Date Feb. 1984
SUBJECT:

ENGINE TIMING BELT FAILURE

MODELS AFFECTED: 1982 AND 1983 SKYHAWKS EQUIPPED WITH 1.8L OHC ENGINES

General Motors has determined that some 1982-1983 Skyhawks equipped with 1.8L Electronic Fuel Injection/Overhead Cam 4-cylinder engine may
have been produced with a cogged timing belt that was inadequately tensioned at time of assembly.

Low tension can allow the timing belt to contact the front cover with resultant noise and/or failure of the internal belt cogs. If several cogs in a row are
lost, the engine may not start or run.

To correct this condition, dealers are to replace the timing belt and tension the new belt to a higher specification.

VEHICLES INVOLVED

Involved are all 1982 Skyhawks equipped with 1.8L EFI / Overhead Cam 4-cylinder engine (Code LH8).

Also, involved are all 1983 Skyhawks equipped with 1.8L EFI / Overhead Cam 4-cylinder engine (Code LH8) built within the following breakpoints:

BEGINNING

PLANT

V.I.N

UP TO AND INCLUDING

1983

Leeds

DK400001

DK429665

Campaign - Engine Timing Belt Failure|Page 1434 > < All Other Service Bulletins for Timing Belt:|86613|Page 1431