buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Campaign - Engine Timing Belt Failure > < Part I - Belt Tension Gauge|Page 1363
Page 1
background image

Timing Belt: Recalls
Warranty & Letter Information

WARRANTY INFORMATION

Dealers are to submit each campaigned vehicle as a separate case on the one-line Warranty Document Form S-764. Dealers submitting warranty claims
by teletype terminal are to transmit campaign completions as a separate case also.

List the one applicable labor operation.

SUBLET

PART

FAILED

PARTS

FAILURE

LABOR  LABOR

  OTHER DEALER

OPER. COUNT  PART NO.

  ALLOW.

CODE

OP. NO  HOURS

  HOURS    MTL.TWG

Replace Timing Belt

^

Without

A/C and

**

P/S    1

90122429

*

96

V1890

1.0 hr

.1 hr

-

^

With A/C                                                                          ** or P/S 1        90122429     *         96       V1891    1.2 hr      .1 hr       -

^

With A/C                                                                           ** and P/S 1       90122429     *         96       V1892    1.4 hr     .1 hr       -

*

List current dealer price of belt plus 30%.

**

.1 hour for administration.

To assure accurate records of all transactions on this Campaign, it is recommended that campaign repairs for each vehicle be listed on a separate repair
order.  Other repairs performed to the vehicle may be listed on the same repair order, and warranty cases other than campaigns may be listed on the same
warranty document.

Zone authorization is not required.
OWNER LETTER

February 1984

Dear Buick Owner:

General Motors has determined that some 1982-1983 Skyhawks equipped with 1.8 liter Electronic Fuel Injection/Overhead Cam 4-cylinder engine may
have been produced with a cogged timing belt that was inadequately tensioned at time of assembly.

Low tension can allow the timing belt to contact the front cover with resultant noise and/or failure of the internal belt cogs. If several cogs in a row are
lost, the engine may not start or run.

To correct this condition, dealers' are to replace the timing belt and tension the new belt to a higher specification. This service will be performed at no
charge to you.

Instructions for making this correction have been sent to your Buick dealer. Please contact your dealer to arrange a service date. The labor time
necessary to perform this replacement is approximately one-and-one-half hours. Please allow additional time for the dealer to process your vehicle.

The enclosed owner reply card identifies your vehicle. Presentation of this card to your dealer will assist in making the necessary correction to your
vehicle in the shortest possible time. If you have sold or traded your vehicle, please let us know by completing the postage-paid owner reply card and
returning it to us.

We are sorry to cause you this inconvenience; however, we have taken this action in the interest of your continued satisfaction with our products.

Campaign - Engine Timing Belt Failure > < Part I - Belt Tension Gauge|Page 1363