Skyhawk L4-112 1.8L VIN 0 TBI (1982)
FIGURE 2
FIGURE 3
INSTALLATION
1.
Install new timing belt.
2.
Adjust timing belt to specifications using tool J-26486-A. Tool J-33039 is used to adjust the water pump. It can be modified as shown in
Figure 1. With gauge (tool J-26486-A) installed (Figure 2), tension to within band (between two arrows on perimeter of dial face); identified
by arrows and 1.8 OHC (see Figure 3).
^
Adjusting the tension with the gauge installed on the belt will ensure an initial over-tensioning with the new belt.
