Skyhawk L4-112 1.8L VIN 0 TBI (1982)
Throttle Body: Service and Repair
Throttle Body Injection Unit Service
Fig. 171 Exploded view of throttle body injector unit. (Typical)
DISASSEMBLE
1. Remove fuel meter cover screws and lockwashers holding cover on fuel meter body.
2. Lift off fuel meter cover with fuel pressure regulator.
3. Remove and discard fuel meter cover gaskets.
WARNING: Do not remove screws securing the pressure regulator to fuel meter cover. The regulator incorporates a large spring under heavy
tension which, if accidentally released, could cause personal injury. Do not immerse the fuel meter cover in any type of cleaner.
