Skyhawk L4-121 2.0L (1986)
Transmission Position Switch/Sensor: Testing and Inspection
Fig. 007 - Wiring Diagram for Chart C-1A Park/Neutral Switch. VIN P
CHART C-1A
PARK/NEUTRAL SWITCH
2.0L "J" SERIES
FUEL INJECTION (TBI)
The Park/Neutral Switch contacts are a part of the Neutral Start switch and are closed to ground in park or neutral, and open in drive ranges.
The ECM supplies ignition voltage through a current limiting resistor to CKT 434 and senses a closed switch when the voltage on CKT 434 drops to
less than one volt.
The ECM uses the P/N signal as one of the inputs to control;
-
Idle Air Control
-
VSS Diagnostics