Skyhawk L4-121 2.0L (1986)
Ignition Coil Wire: Customer Interest
Coil Wire - Revised Parts, Service Information
Bulletin:
86-6D-1
Date:
Oct. '85
Ref. No..: 86-029-6D
SUBJECT:
COIL WIRE SERVICE
MODELS AFFECTED: 1982 THROUGH 1986 SKYHAWKS EQUIPPED WITH 1.8L OR 2.0L ENGINES (VIN CODES G AND P)
Coil-Wire
When replacing the coil wire on a 1982-86 Skyhawk equipped with a 1.8L carbureted engine or the 2.0L fuel injected engines, the proper P/N wire must
be used to insure proper engagement of the terminal and sealing against contamination, (See Illustration).
Part Number
Model Year
12036900
1982-84
12036972
1985-86
NOTICE:
If the 1982-84 part is used on the 1985-86 models, the boot will be too long on the distributor end and may not allow proper terminal
engagement. Also, the boot will be too short on the coil end and a poor seal against contamination may result.
