Skyhawk L4-121 2.0L (1986)
Wiper Motor: Service and Repair
1.
Disconnect battery ground cable.
2.
Remove wiper arms from transmission spindle shafts.
3.
Remove shroud top vent grille panel and screen.
4.
Loosen, but do not remove, transmission drive link to motor crank arm attaching nuts, then pull drive link out of motor crank arm.
5.
Disconnect wiper motor electrical connections and remove wiper motor attaching bolts.
6.
Rotate wiper motor upward and outward, and remove from vehicle.
7.
Reverse procedure to install.
