buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

Recall - Fuel Feed and Return Hose/Pipe Replacement|Page 2561 > < Recall - Fuel Feed and Return Hose/Pipe Replacement|Page 2559
Page 1
background image

Fuel Return Line: All Technical Service Bulletins
MFI Turbo Engine, Campaign Label, Replaced Parts & Information

MFI TURBO ENGINE (RPO LT3, VIN CODE M)

1.

CAUTION: To reduce the risk of fire and personal injury, it is necessary to relieve fuel system pressure before servicing fuel system components. 
Have a dry chemical (Class B) fire extinguisher near work area.

To relieve the fuel system pressure do the following:

-

Remove "Fuel Pump" fuse from fuse block in passenger compartment.

-

Crank engine. Engine will start and run until fuel supply remaining in fuel lines has been consumed. Engage starter for 3.0 seconds to assure
relief of any remaining pressure.

Unless this procedure is followed before servicing fuel lines or connections, fuel spray could occur.

2.

Disconnect negative battery cable.

3.

Use a backup wrench when loosening the screw coupling fittings at fuel line ends.

Recall - Fuel Feed and Return Hose/Pipe Replacement|Page 2561 > < Recall - Fuel Feed and Return Hose/Pipe Replacement|Page 2559