Skyhawk L4-121 2.0L VIN 1 TBI (1988)
Headlamp Switch: Service and Repair
FIRENZA & SKYHAWK
1.
Disconnect battery ground cable.
2.
Remove six screws attaching steering column lower cover to instrument panel, then remove lower cover.
3.
Remove one screw attaching right end of left hand trim cover to instrument panel, then pull cover rearward to detach retaining clips.
4.
Remove four screws attaching headlamp switch to instrument panel, then pull switch rearward and disconnect wire connector.
5.
Reverse procedure to install.
