Skyhawk L4-121 2.0L VIN P TBI (1984)
Radio/Stereo: Service and Repair
FIRENZA & SKYHAWK
1.
Disconnect battery ground cable.
2.
Remove six screws attaching steering column trim cover to instrument panel, then lower trim cover.
3.
Remove screw attaching left end of right hand trim cover to instrument panel.
4.
Remove two screws from under center trim cover and four screws from front of glove compartment, then pull trim cover rearward to disengage
retaining clips and disconnect wire connectors.
5.
Remove four screws attaching upper and lower radio mounting brackets to instrument panel.
6.
Pull radio out just enough to disconnect wire connector and antenna lead, then remove radio.
7.
Reverse procedure to install.
