Skyhawk L4-121 2.0L VIN P TBI (1984)
4. Remove centering tool.
5. Apply RTV sealant GM P/N 1052917 or equivalent to the keyway in crankshaft hub.
6. Crankshaft hub to crankshaft using tool J-29113.
^
Install J-29113 into crankshaft so that at least 6mm of thread is engaged.
^
Pull hub into position and remove J-29113 from hub.
7. Accessory drive belt (crankshaft) pulley.
8. Accessory drive belts.
9. Inner fender splash shield and right front wheel.
10. Lower vehicle and connect battery ground cable.
