buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

ABOUT US
Assembly Line Diagnostic Link (ALDL) Connector <--> [Data Link Connector] > < 6E3-A-36 2.3L (VIN D) (SFI) Driveability and Emissions|Page 2433

Skylark L4-138 2.3L DOHC VIN D MFI (1988)

Page 1
background image

Crankshaft Position Sensor: Service and Repair

Fig. 5 Crankshaft sensor installation. 1988 Quad IV engine

1.

Disconnect crankshaft sensor harness connector from sensor.

2.

Remove crankshaft sensor to engine block bolt, then remove the sensor, Fig. 5.

3.

Reverse procedure to install. Replace sensor O-ring if worn or damaged, lubricating new O-ring with engine oil prior to installation. Torque
crankshaft sensor to engine block bolt to 88 inch lbs.

Assembly Line Diagnostic Link (ALDL) Connector <--> [Data Link Connector] > < 6E3-A-36 2.3L (VIN D) (SFI) Driveability and Emissions|Page 2433