Skylark L4-138 2.3L DOHC VIN D MFI QUAD 4 (1989)
Seat Track: All Technical Service Bulletins
Passenger Seat - Will Not Lock Into Position
Bulletin 91-10-27
Date June '91
Ref. No. 91-215-10
Corp. Ref. No. 131025
SUBJECT:
PASSENGER SEAT WILL NOT LOCK INTO POSITION (REPLACE SEAT OUTER LATCH RETURN SPRING)
MODELS AFFECTED:
1989 SKYHAWK COUPES 1989-91 SKYLARK COUPES
CONDITION:
The passenger seat EZ Entry seat adjuster for coupe models may exhibit a no-lock condition when repositioning the seat assembly forward or backward.
CAUSE:
The latch return spring on the outer track of the seat adjuster may break when adjusting the seat assembly forward or backward. Once the spring is
broken, the latch on the outer track cannot return to the lock position.
CORRECTION:
Replace passenger seat outer latch return spring as follows:
Remove or Disconnect:
1.
Seat adjuster trim covers.
2.
Seat adjuster-to-floor pan attaching nuts, then remove seat assembly from vehicle.
3.
Outer latch return spring from latch and track (Figure 1).
