Skylark L4-138 2.3L DOHC VIN D MFI QUAD 4 (1989)
Parking Brake Cable: Technical Service Bulletins
Parking Brake - Adjustment Update
Bulletin:
90-5-5
Date:
Jan., '90
Ref. No.: 90-053-5
Corp. Ref. No.: 975003R
SUBJECT:
SERVICE MANUAL UPDATE - SECTION 5C-2-4 - PARKING BRAKE ADJUSTMENT
MODELS AFFECTED:
1987-89 SKYHAWKS
1987-1990 SKYLARKS
This bulletin has been revised to add 1990 Skylarks.
The service procedure for adjusting the park brake has been revised because of an increase in the number of teeth in the park ratchet mechanism. This
change improves the "feel" of the park brake while applying it.
The only change to the service procedure is the number of clicks the brake is applied before the adjustment is made.
REVISED PROCEDURE
1.
If necessary (drums turned, or brake shoes replaced), adjust rear brakes as described in Section 5C2 of the service manual.
2.
Lift parking brake lever to 5 ratchet clicks on all models with hand lever park brakes, or depress foot pedal to 2 clicks on Buick Skylarks with foot
apply park brake.
3.
Raise car and suitably support. See Section 0A of the service manual.
NOTICE:
To prevent damage to the threaded parking brake adjusting rod when servicing the parking brake, clean and lubricate the exposed threads on each side of
the nut.
4.
Tighten adjusting nut on parking brake cable until the right rear wheel can just be turned rearward with two hands but cannot be turned forward.
5.
Release parking brake. Rear wheels should now turn freely in either direction with no brake drag.
6.
Lower car.
