Skylark L4-138 2.3L DOHC VIN D MFI QUAD 4 (1989)
Power Steering Pump Mounting
19. Power steering pump assembly.
20. Power steering drive belt and adjust. Refer to Drive Belts / Adjustments. See: Drive Belts, Mounts, Brackets and Accessories/Drive
Belt/Adjustments
21. Idle Speed Power Steering Pressure Switch connector.
22. Reinstall any spark plug boot connector assembly that stuck to a spark plug, back onto the ignition coil and module assembly.
Ignition Coil And Module Assembly
23. Locate the ignition coil and module assembly over the spark plugs and push straight down.
-
Clean any loose lubricant that is present on the ignition coil and module assembly to camshaft housing bolts.
24. Apply Pipe Sealant GM P/N 1052080 or equivalent onto the ignition coil and module cover assembly to camshaft housing bolts.
NOTE: Hand start the ignition coil and module assembly to cam housing bolts.
25. Tighten bolts to 22 Nm (16 lbs. ft.).