Skylark L4-138 2.3L DOHC VIN D MFI QUAD 4 (1989)
New low profile, quick connect couplers, J 39500-20A (High side), and J 39500-24A (Low side), have been released as essential tools, to attach to the
ACR4 (see Figure 3). These are much smaller couplers than the existing ones, and will allow attachment to the port fittings in much tighter quarters.
Select and install the proper R-134a fittings (shown in Figure 4) from the chart below, based on how the ACR4 couplers will attach. Also, remember to
check for proper hood clearance with the conversion fittings. Try the straight fittings first. The two-piece high side fitting is used when the existing fitting
is screwed into the pipe fitting (some 1992, and nearly all 1993 models, use these fittings). Use the 90° elbow if the straight fitting does not allow the
