Skylark L4-138 2.3L DOHC VIN D MFI QUAD 4 (1989)
When the Front Fuel Feed hose/pipe fitting is disconnected at the Fuel Rail, there are two ways in which the retainer (white plastic washer) may be
moved out of position: If the pipe is cocked while being withdrawn from the fuel rail, the retainer may be cocked or pulled slightly out. Also, the weight
of the fuel in the fuel rail may push the retainer out of position when the fuel feed hose/pipe is withdrawn. If the new Front Fuel Feed Hose is installed
without first ensuring the retainer is correctly positioned (square and fully seated), the connection may leak.
6.
Obtain new Front Fuel Feed Hose (Service P/N 24570910). Install the new Front Fuel Feed Hose to the engine fuel rail and to the body fuel feed
pipe fitting, ensuring hose is not kinked or twisted. Torque the pipe nut at the fuel rail to 30 N-m (22 lbs.ft.) and the hose fitting at the body pipe to
27 N-m (20 lbs.ft.), utilizing a backup wrench on fittings.
Reinstall bolt and pipe clamp, torquing bolt to 12 N-m (106 lbs.in.).
Ensure that there is at least 13 mm (112 inch) clearance between the fuel feed hose and any sharp edges. Do likewise for the fuel return hose
assembly.
7.
Reinstall fuel tank filler cap and reconnect the negative battery cable. Advise owner that battery has been disconnected and radio and clock
memory may have been lost.
8.
Start engine and check for possible fuel leaks and correct as required. Also check the fuel pressure connection for leaks.
9.
Install a Campaign Identification Label for 89-C-9A.
