Skylark L4-138 2.3L DOHC VIN D MFI QUAD 4 (1989)
5. Valve body cover. Refer to "Valve Body Cover".
6. Wiring harness from case electrical connector and leads from 3rd clutch pressure switch.
7. Torque converter clutch bolt to auxiliary valve body.
8. 3rd clutch pressure switch.
9. Second clutch switch, if applicable.
INSTALL OR CONNECT
1. Second clutch switch, if applicable.
TIGHTEN
^
Switch to 11 Nm (8 lb. ft.).
2. 3rd clutch pressure switch.
TIGHTEN
^
Switch to 11 Nm (8 lb. ft.).
3. Torque converter clutch bolt to auxiliary valve body. Install new O-ring.
TIGHTEN
^
Bolt to 11 Nm (8 lb. ft.).
4. Wire harness to case and switches.
5. Valve body cover with a new gasket. Refer to "Valve Body Cover".
6. Lower vehicle.
7. Negative battery cable.
ADJUST
^
T.V. cable.
^
Fluid level.
