buick Workshop Repair Guides

Buick Workshop Service and Repair Manuals

All Other Service Bulletins for Torque Converter Clutch:|8971259|Page 3969 > < All Technical Service Bulletins for Torque Converter Clutch:|9071255|Page 3966
Page 1
background image

Torque Converter Clutch: All Technical Service Bulletins
Engine Controls - Code 62 or 26, Intermittent/No TCC

Bulletin 
89-7125-9 

Date 
July, '89

Ref. No. 
89-175-7125 

Corp. Ref. No. 
977125

SUBJECT:
INTERMITTENT AND/OR NO TCC SERVICE ENGINE SOON LIGHT CODE 62 OR 26

MODELS AFFECTED:
1988-89 CENTURY AND SKYLARK MODELS WITH 3T40/125C TRANSMISSIONS

BULLETIN COVERS

A condition of inoperative or no TCC Torque Converter Clutch on a 1988 - 1989 THM 125C/HYDRA-MATIC 3T40 caused by a 2nd gear switch (338)
that may be inoperative. Vehicle may exhibit intermittent service engine soon light and/or code 62 or 26 will be stored in the E.C.M.

DATE OF PRODUCTION CHANGE (Figure 1)

The 2nd gear switch has a 3-digit code stamped on top of the switch (metal side). The first 2 digits in the code represent the week in which the solenoid
was built; the 3rd digit represents the year. All switches built with a number before Julian Date 179 (April 28, 1989), or 3rd digits of 7 or 8 when
exposed to ambient operating temperatures may exhibit the following conditions:

1.

Loose (flat blade terminals)

2.

Terminals will appear blue or black in color

Inspect the torque converter clutch solenoid, third gear switch and entire wiring harness assembly for excessive heat exposure. 2nd gear switches
produced after Julian Date 179 (April 28, 1989) are not affected.

SERVICE PROCEDURE

Do not attempt to repair suspect 2nd gear switches. If an inoperative 2nd gear switch is found in any THM 125C/HYDRA-MATIC 3T40, replace it with
a new one.

SERVICE PARTS INFORMATION

All Other Service Bulletins for Torque Converter Clutch:|8971259|Page 3969 > < All Technical Service Bulletins for Torque Converter Clutch:|9071255|Page 3966