Skylark L4-138 2.3L SOHC VIN 3 MFI QUAD 4 (1992)
Brake Caliper: Service and Repair
Installation
Lubricating Caliper Cavity
1.
Coat inside diameter of bushings with silicone grease.
2.
Position caliper assembly over disc and align mounting bolt holes. If brake hoses were not disconnected during removal, use care not to kink hoses
during installation.
3.
Install mounting bolt/sleeve assemblies and torque to 51 Nm (38 ft. lb.).
Caliper
Front Brake Hoses
4.
If brake hose inlet fitting was disconnected during removal, install and torque to 45 Nm (33 ft. lb.).
5.
Fill master cylinder. Bleed caliper if brake hose inlet fitting was disconnected and recheck master cylinder fluid level. See: Service and Repair
