Skylark L4-138 2.3L SOHC VIN 3 MFI QUAD 4 (1992)
Harmonic Balancer - Crankshaft Pulley: Service and Repair
Removal
REMOVAL
WARNING : To avoid personal injury when rotating the serpentine belt tensioner, use a tight fitting 13 mm wrench that is at least 61 cm (24")
long. This operation can be done using J 37059.
Crankshaft Pulley
1. Remove drive belt.
2. Raise the vehicle.
3. Remove right front tire and wheel assembly.
4. Remove right splash shield.
5. Remove balancer retaining bolt and washer using J 38122 or equivalent to prevent crankshaft rotation when loosening bolt.
6. Remove balancer assembly using J 24420-B or equivalent.